| Customization: | Available |
|---|---|
| Type: | Lead Acid Gel Battery |
| Usage: | Car, Bus, UPS, Electric Power, Lighting, Electric Bicycle, Boat, Solar/Wind Energy System, Telecom |
|
Still deciding? Get samples of US$ 210/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Rosen Solar GEL series are valve regulated lead-acid cells which use a combination of tubular positive plate woven gauntlets, pasted negative plate design and GEL electrolyte using advanced filling techniques in production which assure superior service life and excellent battery reliability. The battery has excellent cyclic performance and charge acceptance ability. It can be used in high-low temperature environment and poor grid condition.
Narada Quality Gel Battery 2V 1000ah for Power Storage, GEL2-1000
ROSEN BATTERY TAGS:
Key Features:
♦Long service life according to EUROBAT Classification
♦Up to 2200 deep discharge cycles
♦High gas recombination efficiency
♦Wide suitability of ambient temperature range
♦Low self discharge
Applications :
♦Solar and wind energy storage system
♦EPS and UPS battery backup
♦Signal system , emergency lighting system , security system
♦Telecommunication Equipment
♦Power plant and transmission system
Complied standards
♦ IEC 60896-21/22
♦ DIN40742
♦ IEC61427
♦ YD/T1360
♦ EUROBAT guide, long life BS6290 part 4
|
1, Function Parameter
|
5, Environment Temperature
|
||
|
Norminal Voltage
|
2V
|
Discharge Temperature
|
-20-50ºC
|
|
Norminal Capacity(10 hours rate)
|
1000Ah
|
Charge Temperature
|
-10-50ºC
|
|
Numbers of Cells
|
1cell
|
Storage Temperature
|
-20-60ºC
|
|
2, Rated Capacity at 25ºC(77ºF)
|
6, Inner Resistance & Max. Discharge Current
|
||
|
10 hour rate(0.1C, 1.80V/cell)
|
1000Ah
|
Fully Charge Battery at 25ºC(77ºF)
|
0.32mΩ
|
|
3 hour rate(0.25C, 1.75V/cell)
|
738Ah
|
Max. Discharge Current
|
1000A(5s)
|
|
1 hour rate(0.55C, 1.60V/cell)
|
508Ah
|
Short Circuit Current
|
3200A
|
|
3, Capacity affected by Temperature(10 hour rate)
|
7, Self-discharge@25ºC(77ºF)
|
||
|
40ºC(104ºF)
|
102%
|
Capacity after 3 Month Storage
|
92%
|
|
25ºC(77ºF)
|
100%
|
Capacity after 6 Month Storage
|
84%
|
|
0ºC(32ºF)
|
90%
|
Capacity after 9 Month Storage
|
74%
|
|
-15ºC(5ºF)
|
70%
|
Capacity after 12 Month Storage
|
65%
|
|
4, Constant Voltage Charging at 25ºC(77ºF)
|
8, Dimension & Weight
|
||
|
Cycle Charge
|
2.35-2.4V
|
Length
|
475mm
|
|
Maximum Charging Current
|
250A
|
Width
|
175mm
|
|
Temperature Compensation
|
-5mV/ºC
|
Height
|
339mm
|
|
Float Charge
|
2.23-2.27V
|
Total Height
|
368mm
|
|
Temperature Compensation
|
-3.3mV/ºC
|
Reference Weight
|
61.5kgs
|
A. Electrolyte: Be immobilized in the cell through the use of a gelling agent or absorbed in the separators and plates.The cells shall have no residual free or bulk liquid electrolyte.
B. Separators: Made of fiberglass. Be porous to electrolyte but electrically insulating.
C. Container & Cover: Cell containers and covers shall be made of a high impact, flame-retardant plastic
D. Terminal: Terminal posts shall be cast in lead or lead alloy and have a copper core insert.
E. Valve: The valve operate at the pressure limits specified. The valve will not allow ingress of outside air into the unit.
| Element | Electrolyte | Positive Plate | Negative Plate | Container |
| Material | Colloidal silicon | Lead dioxide | Lead | ABS |
| Element | Cover | Safety valve | Terminal/Wire | Separator |
| Material | ABS | Rubber | Copper | Fiberglass |
| Anna Yu Sales Manager Tel: 0086 159 55104975 |
){kind=link}